Resin Bound / Bonded, Concrete, Tarmac and Block Paving Driveways In the Barnsley Area

Affordable Resin driveways

Call Now

Reviews

RESIN DRIVEWAYS

Don't like forms?
Just CALL 01484 663454 and book a FREE survey.

RESIN + FLAGSTONES + BLOCK PAVING + TARMAC + CONCRETE

You can find out the cost of installing ANY drive here by answering a few questions.

We need to know the size of the driveways area.
What is your existing driveway surface?
Will we need to install edging to your new driveway?
What type of aggregate are you looking to install and the required depth.
Will the aggregate be combined with UV stable resin or Non UV stable resin?
Does your existing driveways have easy access?

To explain the above factors further:-

We need to know the size of the driveways area.

You have heard the costs of resin driveways are related to the square metre rate. “The larger the driveway the lower the cost per square metre”. This guide is true if you ignore the fact that larger sites have additional costs, such as the costs of additional equipment hire, the cost associated with difficult site access and the cost of various additions such as retaining walls, supplementary drainage, edging requirements etc;

If you are laying a resin driveway?

When installing a resin driveway. A major cost factor relates to your existing driveway surface. Is it concrete or tarmac? What level of cleaning, levelling preparation and repair is needed to bring it up to the standard required for it to be classified as a perfect sub-base for a new resin overlay. We always try to save you money and opt for a resin drive overlay whenever possible. An overlay on block paving will be looked at carefully to see if it is able to support a resin overlay or if it needs to be excavated. When enlarging a driveway into an existing garden. The garden will have to be excavated with heavy machinery and a heavily compacted MOT Type 3 Sub Base to SHW clause 803 will then be laid to a suitable depth. We will then lay an open surface course asphalt (Bituminous Macadam) to allow the installation to be SUDs compliant.

Will we need to install edging to your new driveway?

Edging is essential in maintaining a neat and high quality finish and savings will be made if existing edgings are in place. If not any type such as bricks, blocks, paving slabs, timber or a wall will enhance and show of your resin driveway.

What type of aggregate are you looking to install and the required depth.

Not all aggregates are the same. We select the finest kiln dried aggregates which have been thoughtfully combined together to give you the fabulous kerb appeal you deserve.
As a safety led business we ensure that all surfaces are laid to meet with BS 7976-2 guidelines. Our aggregates range from a 1-2mm, up to a 10mm aggregate. It’s established that the depth must be 3 times the largest aggregate size, so a 2-5mm aggregate would be installed at a minimum of 15mm, while a 10mm aggregate would have to be installed at a minimum of 30mm.

Will the aggregate be combined with UV stable resin or Non UV stable resin?

There are two resins types available on the market. UV stable resin and UV non stable resin. If you’re looking to save costs, and go cheap you would use UV non stable resin however your driveways will discolour and yellow over time. If you want to protect your aggregate from discolouration than you would use UV stable resin. We have a large range of colours to choose from to give your home that special look and your resin driveway will not fade over time when exposed to the harshest light from the sun. This is due to the fact that we use only the very best UV stable resins.

Does your existing driveways have easy access?

Some driveways, pathways and patios are harder to access and may have awkward layouts. Which is why we always need to survey and inspect the job to be able to deliver the best possible price.

Don't like forms?
Just CALL 01484 663454 and book a FREE survey.

Click for quote

The team have been in the Construction and Home Improvement Industry for many years and have a reputation for outstanding work of the highest quality. We work closely with all clients and are always involved from start to finish with each project, so as to enable any potentially difficult areas of your driveways project to be fully anticipated and agreed prior to start on site. This is very important on complicated “One-Off” driveway construction where you, the client are looking to delivery an element that requires the utmost attention to detail.

We are all fully involved in the operational issues, including client liaison, development and project management and really enjoy working with you to fulfil your requirements. We get real pleasure handing over finished projects that not only meet with, but often exceed your expectations.

We at Fabulous Resin Driveways believe that our “Can-Do” attitude, combined with our ability to recognise when specialists are required for a particular element of work, really make us unique and is a skill that sets Fabulous Resin Driveways apart from any other contracting organisation.

ARE YOU A TALENTED RESIN DRIVEWAYS INSTALLER ?
We are looking for talented Resin Driveways Installers please call 01484 663 454

As a local company we are able to offer competitive prices on Resin, Concrete, Tarmac and Block paving driveway projects in the following Barnsley areas; Athersley, Carlton, Cudworth, Cundy Cross, Dodworth, Elsecar, Gawber, Honeywell, Hoyland, Kendray, Kexbrough, Kingstone, Lundwood, Mapplewell, Monk Bretton, New Lodge, Oakwell, Old Town, Pogmoor, Royston, Shafton, Smithies, Staincross, Stairfoot, Wilthorpe, Worsbrough includes Worsbrough Bridge, Worsbrough Common, Worsbrough Dale, Worsbrough Village, and Ward Green, Wombwell.
We also install in Huddersfield, Leeds, Wakefield, Manchester, Bradford, Halifax, Sheffield,

​Affordable Resin driveways

Affordable Resin driveways